Class Blog
Cup with alternating arrow pattern.
I had never used openSCAD (which I assume was the same with most of us) but I have a small amount of experience with coding in java from taking CS 149 and 159 and was surprised to learn how similar it felt. Since I wasn’t […]
Earbud Organizer with OpenSCAD
I was most excited to start working with OpenSCAD since I’m a senior Computer Science major. However the biggest part of this class I’ve struggled with is a lack of creativity. I wanted to attempt to make something useful […]
Geometric Spinner
Getting to know OpenSCAD was fun, yet challenging. I am currently enrolled in a Python coding class, so I had a basic understanding of coding format and language. I looked at some various YouTube videos for inspiration […]
OpenSCAD Ring holder
For my project I wanted to create something functioning, and what better way to do that than to combine it with the project we just finished? With this in mind, I set out to design a simple ring holder. I originally wanted three […]
8-bit Boss
Before this project, I had never coded before, so the first week I spent a lot of time learning different coding words and how the scale works. I discovered online, that I can change the color of my design and I began trying to […]
OpenSCAD SD Card Holder
Coding in openscad was a little difficult to get the hang of at first so I decided I’d start by watching Dr. Taalman’s Youtube guide on how to code a polybowl and then work from there. I started by using the basic layout of a polybowl, then […]
Attempts with Code
The first time I have ever tried writing code was with OpenSCAD. In high school, a lot of friends took coding classes and were able to create incredible pathways for robotic cars, and computers. I did not know there […]
Triangle Twist
For this project we used OpenScad and to be honest I found it to be the most confusing out of all the assignments we have done. I have no coding experience, so trying to figure everything out was pretty difficult. Nevertheless, I […]
Rocket Ship
For OpenSCAD I found very quickly that I suck at it. I am definitely not a coder! In frustration with all the little details I decided to focus and make small things and then increasing their difficulty. I started with a cone and […]
3D Octopus
I began this project and was very excited to experiment with the complexity and accuracy which OpenSCAD provided for 3D printing. I decided to create a snowman for my first design. I began by creating 3 separate spheres to […]
8 Bit 1 Up Mushroom Cookie Cutter and Cup
Introduction As Christmas and Hannukah near (which I will now refer to as Christmakkah), I decided what better way to celebrate the holidays than making some little nerdy gifts that my partner in crime T.J. would enjoy. That naturally began with his love of cookies […]
Dreidel in OpenScad
I just about had a heart attack when I heard we would be coding. I come from a family of computer engineers and seem to be the only one who didn’t inherit the coding gene, so I was sure that this was going to go poorly. However […]
The Crazy Twist
So, first and foremost, I have tried using code before and this only reiterated by original consensus that code is not my strong suit. With this in mind however, I definitely wanted to make something simple yet absolutely crazy. […]
Openscad Cup
After starting this project, I quickly realized that it was not going to be easy. I struggled for many hours trying to figure out how to write code using the material and instructions provided for us and could not figure it out. […]
OpenSCAD Design from Code
When working on this project, I quickly realized that I was not going to be successful at coding. The initial design that I made with code was simply a sphere inside of a cube. I wanted to make it more complicated, but could […]
Turner Cube in OpenSCAD
When I first started with OpenScad, I struggled to understand the language. I downloaded the software to my laptop and tried to see what I could do with the limited knowledge I had accrued during class. It was a […]
The Legend of Zelda Pencil Holder
I started fiddling with different shapes in Tinkercad and originally, I made a triforce keychain using 3 triangles and a loop. As I kept fooling around and followed the tutorials on Tinkercad, I later made a box with a hollow cube on its inside to […]
Helmet in OpenSCAD
So for this openScad project I had a real hard time coming up with any ideas for it because the program didn’t make a lot of sense to me, it just didn’t do things in the order I wanted or in a way that I thought it should have. […]
Cube with Hidden Compartment
When I was first starting to work with OpenScad, it seemed to be nothing but a slippery slope leading towards nothing but failure for me. I began by downloading the OpenScad software onto my laptop so that I could play around […]
Openscad-a problem I strongly dislike lead to a cute little thang
Not going to lie. I hate openScad with a passion. However, though my grievances, I learned a lot and hoping I can share the “joys” of my journey with you all. I opened […]
Geometric custom ring!
The most difficult part of the project was deciding on the design of the ring. Once I learned how to make the basic shape of the rounded ring I tried a couple different designs and variations. The one feature I knew I wanted […]
PacMan Ring
For my first attempt at a ring design I stuck with the basic ring design template in Fusion 360 and focused much more on the imprinted desing of the ring itself that was done in Mexmixer. I quickly discovered that photo files […]
Grandma’s Ring
In this assignment, I used Fusion 360 to create my Ring. During the fact that this is going to be a present for my grandma, I used the 15,7 mm (size 5) diameter. After creating the ring, I used a tool called “shell” to make […]
Mountain Scape Ring Design
For my ring design I wanted to move away from a meshmaker design and work on the shape of the ring. I struggled for a long time to make this work however. My original idea was to make a wave shape, however […]
Tildes Ring
I really struggled with a design for this ring. I wanted something simple but detailed. I finally decided on using the tilde, or more commonly called, the squiggly thing below the escape button on most keyboards. I liked this […]
Dice And Domino Piece
Working with OpenSCAD was really fun and interesting! I didn’t have a chance to code before but it was an amazing experience and I hope I can code something else in the future. I am not going to say it was easy to figure out […]
First time coding with OpenSCAD
This OpenSCAD project gave me my first opportunity to code. I enjoyed the experience and it allowed me to test myself. For the project, I came up with the idea to make a diamond. I know this will challenge me because I will […]
A Pure Ring
Fusion 360 is similar to other cad software programs but it did take me a moment to familiarize myself with the tools and where they were before I got started. I measured my chosen finger with a caliper and looked up the right […]
A Jewelry Dish for Our New Rings! OpenSCAD Personal Design Project
Hey! So I designed something that I personally find cool and semi-useful or functional. I like making things that I know I can use. I coded something simple to begin with […]
Mole Hole Cage
Working with OpenSCAD was really fun! During the fact that I’m planning on declaring a CIS minor, where you also have to write codes, I could already practice my skills for later on! To be honest, it did not take me that long to figure […]
Week 14 – OpenSCAD Presentations
Show and Tell Any remaining rings to show off? How did you level up your OpenSCAD code from last week? Course Evaluations In the last 15 minutes of class we’ll do a set of official Course Evaluations. Later this week I’ll also have some Surveys […]
Snowman Family- OpenSCAD
I got very excited when I head we were going to do some programming in thins class. As a CIS minor, I had to take a programming class using Python, and I absolutely loved the class. To me programming is a challenge that I embrace […]
Tuner’s Cube – OpenSCAD
This project was definitely the most daunting of everything we’ve done so far in this class. When I was told that I was going to have to write a code and and 3D print something using that code, I was unsure of what to think […]
Week 13 – Level up
Welcome back! Today we’ll talk about taking your OpenSCAD and Fusion 360 projects to the next level. First: Rings! Come up to the front and show off what you got back from Shapeways. What are your next steps? Are you going to iterate your design […]
Rough Ring
I wanted to make a ring that looked rough and haphazard but with some sort of continuing design on it. I eventually settled on making the edges rough but in a series of lines that were spaced evenly apart. I used a stamp of a […]