Cat Ring

After trying a couple different stamp designs in Meshmixer, I decided I was not satisfied with how it looked, so I went online for inspiration for other rings that might be easier. I wanted to try to make a ring with cat ears like […]

Cusp Ring

December 12, 2017 Eli

The design process for my ring took several days of thinking and playing around inside of Fusion 360. At the start of the project, the class did a walkthrough in 360, learning how to construct a rudimentary ring with the tools provided. After we learned the steps for a basic ring […]

Love Ring

In this assignment, I created a ring, which I imported from Fusion 360. I just followed the steps Dr. Taalman provided for us. To make this ring unique, I used the shell tool at the end of creating the ring and set it to .75 […]

PacMan Ring

For my first attempt at a ring design I stuck with the basic ring design template in Fusion 360 and focused much more on the imprinted desing of the ring itself that was done in Mexmixer. I quickly discovered that photo files […]

Grandma’s Ring

December 11, 2017 NiclasM

In this assignment, I used Fusion 360 to create my Ring. During the fact that this is going to be a present for my grandma, I used the 15,7 mm (size 5) diameter. After creating the ring, I used a tool called “shell” to make […]

Tildes Ring

I really struggled with a design for this ring. I wanted something simple but detailed. I finally decided on using the tilde, or more commonly called, the squiggly thing below the escape button on most keyboards. I liked this […]

A Pure Ring

Fusion 360 is similar to other cad software programs but it did take me a moment to familiarize myself with the tools and where they were before I got started. I measured my chosen finger with a caliper and looked up the right […]

Rough Ring

I wanted to make a ring that looked rough and haphazard but with some sort of continuing design on it. I eventually settled on making the edges rough but in a series of lines that were spaced evenly apart. I used a stamp of a […]

Row Well Ring

I decided that I wanted to put the phrase “Row Well and Live” on my ring after trying a few different designs and growing frustrated. This was a phrase that my AFROTC commander taught us, explaining that it signified […]

Studded Ring

For this assignment we used the softwares Fusion360 and Meshmixer. To be honest at first Fusion360 was very difficult to understand, but I really liked how detailed and complex the gadgets were. I began my design by […]

Klingon Ring

So my ring has the klingon symbol from Star Trek on it, that is going to be printed in pink acrylic material. I chose this design because I’m getting back into Star Trek and I wanted a piece of Star Trek themed merch that didn’t […]

Psalm Ring

For my Ring Project I decided to do something a bit different. I was trying to think of what to put on my ring and I finalized on a Bible verse. For the style of my ring I originally chose to cut out the middle […]

Crown Ring

November 15, 2017 Gwen Han

Originally, I was going for a type of ring where it wraps around the finger (shown below). I messed around a lot with the stencil and images (re-meshing and different images), coming up with different images on […]

Shell Ring

Reiterating that I have never participated in a technology class similar to 3D Printing before, each project enlightens me on a different creation that I never thought was possible through 3D printing. As a fashion lover myself […]

Pinky Ring

For this assignment, I designed a pinky ring using the 3D design program called Fusion. I started by going through the tutorial that was provided to learn to make the ring. I went through all the steps and then I decided to change […]

1 2